Panasonic VDR-D100 operating instructions About the white balance sensor a

Manual recording functions

To set the white balance manually

Select [ ] mode, fill the screen with a white subject and then move the joystick up to select [ ].

When the [ ] display changes from flashing to on, setting is complete.

≥When the [ ] display continues flashing green, the white balance cannot be set because the place is dark etc. In this case, use the automatic white balance.

∫About the white balance sensor A

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording, or it may not function properly.

MNL

A

≥When the [] display flashes white, the manual white balance previously adjusted is stored. Whenever recording conditions change, re-set the white balance for correct adjustment.

≥When the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the unit on after removing the lens cap.

≥When setting both the white balance and the iris/ gain, set the white balance first.

Recording

59

LSQT0969