63
LSQT0969
Playback
Motion picture playback
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1 Press the MENU button, then select
[PLAYSETUP] # [PLAYMODE] # [BY DATE]
and press the joystick.
≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion
pictures will be played back in succession. ([ ALL] is displayed.)
2 Select the date for playback, then press the joystick.
The scenes recorded on the same day are displayed as thumbnails.
3 Select the scene to be played back.
≥Even if scenes are recorded on the same day, they are grouped separa tely in the following cases.
– When the num ber of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
– When the di sc is removed (-RW‹V›) (-R)
– When the di sc is repaired (-RW‹V›) (-R)
– When the mod e dial is switched (-R)
– When the pow er is turned off (-R)
Press the MENU button, then select [ PLAY SETUP]
# [ RESUME PLAY] # [ON] and press the joystick.
If playback of a motion picture is stopped, [R] appears on the thumbnail
view of the stopped scene.
≥If playback is stopped at any point during a motion picture while
[RESUME PLAY] is set to [OFF], the next time the motion picture is
played back, it will be from the beginning.
≥The resume position memorized is cleared if the
unit is turned off, but the menu setting is not
cleared.
Playing back motion pictures by date
Resuming the previous playback
D200(P_PC)eng.book 63 ページ ２００６年１月１８日 水曜日 午後５時４６分