Panasonic VDR-D100 operating instructions Protecting a disc

Protecting a disc

Protecting a disc

(RAM) (-RW‹VR›)

This is for preventing recorded contents from being deleted or edited by mistake.

Further recording and editing is not possible on protected discs until the protection is released.

¬Rotate the mode dial to select .

1Press the MENU button, then select [ SETUP] #

[ DISC PROTECT] and press the joystick.

2When the confirmation message appears, select [YES], then press the joystick.

To release disc protection

1)Press the MENU button, then select [ SETUP] # [ DISC PROTECT] and press the joystick.

2)When the confirmation message appears, select [YES], then press the joystick.

≥If the disc has been protected on another device, it may not be possible to release the protection on this unit. In this case, release the protection on the device that you used to protect it.

Disc and card management

87

LSQT0969