Panasonic VDR-D100 Using an SD card on a computer Macintosh, Connection, 123

Using an SD card on a computer (Macintosh)

Using an SD card on a computer (Macintosh)

Connection

¬Connect this unit to the AC adaptor.

¬Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select .

1 Press the MENU button, then select [ SETUP] #

[ USB FUNCTION] # [PC CONNECT] and press the joystick.

≥Press the MENU button to exit the menu screen.

2 Connect this unit and a computer.

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The unit

and computer will not operate properly if the plugs are not inserted fully.

icon appears.

≥ Do not use any other USB cables except the			A
	supplied one. (Operation is not guaranteed with any
	other USB cables.)
≥ When the unit is connected to a computer, the		≥ When a computer is accessing a card in this unit,
	operation mode cannot be changed and its	the card access lamp lights. ( appears on the
	power cannot be turned off.	LCD monitor.) Do not disconnect the USB cable or
	In this case, disconnect the USB cable (l 124).	AC adaptor while the card is being accessed as it
		may damage the data.

With a computer (VDR-D200 only)

123

LSQT0969