Panasonic VDR-D100 operating instructions Setup menu, 127

Setup menu

∫[ DISPLAY]

≥ OFF ≥ ON

The screen indications are selected as shown in the illustration below.

OFF

;

3:30 PM 12.15.2006

ON

SP 0h00m00s ;

R 0h00m EIS

3:30 PM 12.15.2006

∫[ BEEP SOUND]

≥ OFF ≥ ON

This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.

1 Beep

When you start recording When you turn on the power

When this unit is recognized by the computer or the printer, etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps for 4 times

When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 130)

Menus

∫[ POWER SAVE]

≥ OFF ≥ 5 MINUTES

[OFF]: The power saving function is not activated.

[5 MINUTES]:

When about 5 minutes passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again.

≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES].

–When using the AC adaptor

–When connecting the unit to a computer or printer via the USB cable

∫[ INITIAL SET]

≥ YES ≥ NO

When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition.

(Language setting cannot be back to the initial shipping condition.)

∫[ DEMO DEMO MODE]

≥ OFF	≥ ON
This item is used to start the unit
demonstration.
(Only when using the AC adaptor and the mode
dial is at the	or	position)
If you set this to [ON] without inserting a disc or
an SD card, this unit is automatically set to the
demonstration mode for introducing its
functions. If any button is pressed or operated,
the demonstration mode is canceled. If no
operations take place for approx. 10 minutes,
the demonstration mode automatically starts.			Others
To terminate the demonstration mode, insert a

disc or an SD card, or set this to [OFF]. For normal use, set this function to [OFF].

127

LSQT0969