Panasonic VDR-D100 Using discs on a computer Macintosh, 120, Pixe VRF Browser EX starts

Using discs on a computer (Macintosh)

Using discs on a computer (Macintosh)

Creating a DVD-Video on a computer from a recorded disc

With a computer (VDR-D200 only)

Using Pixe VRF Browser EX and ImageMixer VCD/DVD2, you can create a DVD-Video disc (DVD- RW/DVD-R disc) from the images recorded on this unit.

≥Before using DVD-RW (VR format), DVD-RW (Video format) or DVD-R on a computer, finalize them on this unit.

≥To create a DVD-Video disc, a separate DVD-RW/DVD-R/+RW/+R drive is required.

≥Before initial use, select the software’s [ReadMe] in the folder in which the software is installed and then read through the additional instructions or updated information.

¬Connect this unit to the AC adaptor.

1Remove the disc from the unit and rotate the mode dial to select .

2Connect this unit and a computer.

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The unit

and computer will not operate properly if the plugs are not inserted fully.

≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

A

3(On the computer)

Double-click the [Pixe VRF Browser EX for Panasonic] icon in the [ImageMixer for Panasonic] folder you installed.

Pixe VRF Browser EX starts.

4Click the drive button, select [MATSHITA DVD-RAM LMXK1931] from the pop-up menu and then click

[OK].

The cover of the disc compartment on this unit opens.

120

LSQT0969