JVC VR-X1600U, VR-X3200U manual Setting the Date and Time of This Unit,  Using the time server

Click [OK]

Setting the Date and Time of This Unit

This section describes procedures to set the date and time of this unit.

Caution:

●There may be a daily error of 10 to 20 seconds depending on the operating environment.

●The clock time may vary significantly when the lithium battery level used for backup in this unit is running low. In such a case, consult your nearest JVC KENWOOD dealer.

Using the time server

Use of a time server (NTP server) is recommended to ensure recording at an accurate time.

Caution:

●Connect the time server to the LAN2 network.

1Click the [Start] button on the desktop, followed by clicking [Control Panel]

The control panel opens up.

2 Click [Clock, Language, and Region]

The [Clock, Language, and Region] screen appears.

3 Click [Date and Time] and select [Internet Time]

4 Select [Change settings…]

The [Internet Time Settings] window opens up.

5 Select the [Synchronize with an Internet time server] check box and select a server

6

Setting the time manually

If you do not use a time server (NTP server), click [Change date and time] in [Date and Time] screen in Step 3 in “Using the time server”.

85