130
<Recorder Part> Reference

Checking HDD Usage

䡵Displaying the HDD meter

You can check the usage of HDD(s) of this unit with the
meter.
1 Double-click the [2. HDD Meter] on the desktop
The HDD meter appears.

䡵Changing HDD meter settings

You can specify the monitoring interval and HDD settings.
●Each drive is used for the purpose indicated below.
1 Click [Settings] in the HDD meter screen
2 Adjust the settings
3 Click [OK]

Checking the Load Factor of This

Unit

This unit is equipped with a CPU meter, so you can check
the load factor of this unit from the meter.
When the load factor increases, malfunction s such as failure
to record images at the specified frame rate may occur.
1 Double-click the [1. CPU Meter] on the desktop
The CPU meter appears.

Caution:

●When there is a red indication on the CPU meter,
decrease the load by, for example, lowering the

displaying/recording frame rate.
HDD Maintenance
Drive Purpose
CSystem disk
MFor saving temporary files of export
data.
LFor saving operation logs.
D or other
than the
above
For saving recorded images.
Item Preset Values Description
Update
interval
10 to 300
seconds
For specifying the update
interval in seconds.
Transparency
0 to 90% For specifying the
transparency of the HDD
meter.
Select
drives to
monitor
^Built-in HDD(s) and
recognized external
HDD(s) are listed.
Select HDD(s) to monitor.
Green Yell o w Red Close
Load factor below 5%: Grayed out
Load factor below 60%: Lighting up in green
Load factor below 90%: Lighting up in green
and yellow
Load factor over 90%: Lighting up in green,
yellow and red