JVC VR-X1600U About the Software Used with This Unit, Overview of the Software, Software Overview

About the Software Used with This Unit

Overview of the Software

The following software is used with this unit.

Software Overview

Starts up XProtect Enterprise Management Application. XProtect Enterprise Management Application is software to perform settings of the monitoring system using XProtect Enterprise. This software is referred to as "Management Application" in this manual.

Starts up XProtect Enterprise Smart Client. XProtect Enterprise Smart Client is a software to view live or recorded images with the monitoring system using XProtect Enterprise. This software is referred to as "Smart Client" in this manual.

Starts up the CPU meter. This software displays the load factor of this unit. By default, the CPU meter appears on the upper left of the desktop automatically when you start up this unit.

Starts up the HDD meter.

This software displays the HDD usage.

Locking/unlocking the operation of this unit.

Starts up unit settings menu.

You can perform settings of items other than those with Management Application.

Starts up maintenance information menu.

You can display or save information such as the runtime of this unit.

Software	Overview
	Starts up the screen keyboard.
	Use this software to enter characters
	using the mouse.
	You can view the data exported in
	database format.
Intel ® Rapid	This software is used to construct RAID.
Storage	Click [Start], [All Programs], [Intel],
Technology	[Intel ® Rapid Storage Technology] in this
	order to start up.

Notices for Changing Settings

If you specify wrong settings, this unit may not operate properly.

●Before you change setting, it is recommended to save unit settings and settings of Management Application.

(A Page 78 "Saving/Restoring Settings")

Caution:

●Never turn off the power while saving settings of Management Application.

When you change settings of Management Application

When you have changed settings of Management Application, save the settings, then restart the service. otherwise, the new settings are not applied.

Save the settings and restart the service from the [File] menu of Management Application.

Note:

●You can also restart the service from [Services] in [Advanced Configuration]. (A Page 113 "Services") In addition, when you shut down Management Application, the screen to select whether to save the settings or restart the service is displayed. (A Page 33 "To close Management Application") Make sure to select "Save changes - restart services" in this case.

●If you change settings of Management Application while Smart Client is on, close Smart Client and restart the service.

19