Click the [Playback] tab

<Viewer Part> Reference

Saving Images and Audio Sounds on a USB Flash Memory (Export)

Images and audio recorded on this unit can be saved (exported) as video, still pictures, or in database format, and be viewed on computers outside the surveillance system.

A surveillance computer may write recorded images and audio sounds to a USB flash memory or the desktop.

When using a USB flash memory, connect the USB flash memory to the front of this unit beforehand.

Saving as a Video or Still Image 1

3 Select a camera from the [Source:] list

4 Click [AVI/JPEG Export…]

2 Enter start date/time and stop date/time in the [Export] section

When you click [Set] in [Start time], the date/time is entered in the master time display part in [Time Navigation].

When you click [Set] in [End time], the date/time displayed in the master time display part in [Time Navigation] plus 1 second is entered.

Caution:

You may fail to use [Export] if images to export contain ones with a large time gap by changing the time. In this case, export images separately, images before changing the time and ones after changing the time. (Example: summer time, etc.)

The export dialog will appear.

Ensure that the start and end date/time and camera name you entered are displayed.

Note:

Preparation for export may take a while depending on connection status of additional HDD(s).

5 Select the export format

Select [AVI] (movie clip) or [JPEG] (still image).

Select whether to display the time in the image to export.

6 If you have selected [AVI], select a frame rate

Select either [Full] to transmit all images to an AVI file, or [Half] to transmit images for each second to decrease the AVI file size (images are played back in real time).

7 When AVI format is selected, select the codec type from the [AVI codec] list

164

Page 170
Image 170
JVC VR-X3200U manual 164, Saving Images and Audio Sounds on a USB Flash Memory Export, Saving as a Video or Still Image