93
Hardware Devices (Hardware Properties) (continued)
PTZ Device PTZ
settings
Connected
cameras have
Pan/Tilt/Zoom
capabilities
Select check box
䢇Do not select
check box
Select this check box when a PTZ camera is included in
the cameras connected to the unit. If this check box is
not selected, the PTZ function is not available.
PTZ type on
COM1
䢇None
JCBP-S
Pelco-P
Pelco-D
Select a control method suitable for PTZ camera(s) if
the camera is controlled through the COM1/COM2 port
of the network encoder (IP video server). Select [None]
when no PTZ cameras are controlled through the
COM1/COM2 port.
PTZ type on
COM2
Camera The camera name is displayed.
Type 䢇Fixed
Moveable
Select whether the camera is [Fixed] or [Moveable].
[Fixed]: Fixed camera
[Moveable]: PTZ camera
Port COM1
COM2
Available when [Moveable] is selected for [Type].
Select the control port of the network encoder (IP video
server) to control the PTZ function.
Port Address 䢇0Available when [Moveable] is selected for [Type].
Specify the camera’s port address. Normally, specify
the address as “0” or “1”.
When series connection is applied for PTZ cameras,
the unit identifies the cameras by the port address.
Confirm the recommended setting for each camera
referring to the camera’s instruction.
Fisheye Fisheye Enable fisheye Select check box
䢇Do not select
check box
Select this check box to use the fisheye lens function.
Fisheye license key For specifying the license key to use the fisheye lens
function.
●For details on purchasing a license key, consult our
authorized dealers or JVC KENWOOD service
center.
Item Preset Values Description