JVC VR-X1600U, VR-X3200U manual Auto PTZ Patrolling,  To change the order of the list

8 When [Type 1] is selected: Enter a name for the preset position, and click [Add New]

The preset position is set and added to the list.

9 Click [OK]

Note:

●The position at the top of the list corresponds to Preset Position 1.

●The number of preset positions that can be registered may differ according to the camera in use.

●To test the defined preset position, click [Test]. You can check the position on the screen.

To change the order of the list

Select a preset to change the order from the list and click

[ ] or [ ]

To modify a preset position

Select a preset to modify from the list and modify the position in the [PTZ preview] screen. Click [Set New Position] to modify the preset position.

To delete a preset position

Select a preset to delete from the list and click [Delete].

Note:

●Do not insert space at the beginning of the preset position name. Such preset positions may not work.

Auto PTZ Patrolling

PTZ patrolling is a feature that enables automatic movement of a PTZ camera between several preset positions.

Caution:

●To define a patrol scheme, you must specify at least two preset positions. You must also specify the PTZ patrolling schedule of any camera in [Advanced Configuration]B [Scheduling and Archiving] (A Page 121).

1 Click [+] in [Advanced Configuration]

2 Click [+] in [Hardware Devices] and click [+] for the hardware device name of a PTZ camera

41