JVC VR-X1600U, VR-X3200U manual Rear Panel

Rear Panel

O	N	M	L
F
	G H	IJ	K
F Monitor Output Terminals (D-sub 15pin, DVI)			J Audio Input Terminal

Outputs the recorded images, live images or the setup screen.

Connect to an audio input device such as a plug-in microphone.

Note:

●The DVI terminal emits only digital signals.

GLAN1/LAN2 Terminals

Connect to the network using a LAN cable.

Indicator	Color		Status
position
Left	-	Off	Communication at 10 Mbit/s.
	Green	On	Communication at 100 Mbit/s.
	Orange	On	Communication at 1 Gbit/s.
Right	-	Off	Not connecting to the network.
	Yellow	Blinking	Communication is in progress.

Note:

●For how to use LAN1/LAN2, refer to “Proper Use of LAN1/ LAN2” (A Page 119).

HSERIAL Terminal

For connecting the communication control terminals on a USB mouse (sold separately), USB flash memory (sold separately), UPS (sold separately) or additional HDD (sold separately).

Note:

●For connection of external devices, consult your nearest JVC KENWOOD dealer. You can also check on our website.

IAudio Output Terminal

Connect to an audio output device such as a speaker.

K[AC IN 120V - 240V 50Hz/60Hz] power input terminal

Connect to an AC120 V to AC240 V outlet using the power cable supplied.

L[POWER] switch

Switches the power on or off.

Note:

●Be sure to press and hold down the [OPERATE] button on the front panel to shut down the system before switching off the power supply.

M[eSATA] Terminal

Connect to an additional HDD (sold separately).

Note:

●For details on additional HDDs you can connect to this unit, consult your nearest JVC KENWOOD dealer. You can also check on our website.

NSignal input/output terminals

For operating the unit using external alarm signals or signals received from external devices, or for operating external devices by outputting signals.

Note:

●Diameter of applicable cable: AWG22 to AWG28

OConnector cover

Note:

●Do not remove the cover.

21