JVC VR-X1600U, VR-X3200U manual Making Full Use of Recording Performance, Click Finish

11 Click [Finish]

Return to the top window.

In the end, restart the service so that the specified settings are applied. (A Page 33 "To close Management Application")

Basic setup of the monitoring system has been finished. Now you can receive, view and record images from installed cameras.

Making Full Use of Recording Performance

To ensure sufficient data storage on this unit, be sure to add additional HDD and make the appropriate saving method settings.

Building a RAID10 configuration

By adding internal HDD you can increase the storage capacity.

Furthermore, the data duplication and dispersion achieved through using RAID allows for more secure data and high speed saving.

As this unit supports RAID10, you can build a RAID10 configuration to achieve the maximum recording performance (frame rate).

For adding internal HDD and building a RAID configuration, see "Adding an HDD" (A Page 71) and "Building a RAID Configuration" (A Page 72).

Setting the recording data and archiving destination to the same drive

By setting the recording data and archiving destination (recording path/archiving path) to the same drive, you can reduce the strain on this unit when moving data.

Set the recording/archiving path in [Cameras and Storage Information] in [Advanced Configuration] of Management Application. (A Page 100)

Making settings to erase old recordings

By setting an appropriate storage period for recording data, old recording data will be erased at fixed intervals to retain a constant capacity.

Set the storage period for recording data in [Cameras and Storage Information] in [Advanced Configuration] of Management Application. (A Page 100)

37