Enterasys Networks ELS10-27TX manual Ports VlanConfigPorts, IP VlanConfigIP

VLAN MIB Objects

4.3.4 Ports (VlanConfigPorts)

A bit mask of the ports in this VLAN. Each octet within the value of this object specifies a set of eight ports. This is a list of all ports within the VLAN. From right to left, the first octet specifies ports 1-8, the second octet specifies ports 9- 16, the third octet specifies ports 17-24 and the fourth octet specifies ports 25-27. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port.

For Example, to include ports 1 through 4 in the VLAN, you would use the octet (0x)0000000F. If you wanted to include ports 1, 5, 9 in the VLAN, you would use the octet (0x)00000111.

In this example, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of ‘1’ then that port is included in the set of ports; the port is not included if its bit has a value of ‘0.’

els10-27VlanConfigPorts OBJECT-TYPE

SYNTAX OCTET STRING (SIZE (1..8))

ACCESS read-write

STATUS mandatory

::= { els10-27VlanConfigEntry 3 }

The MIB OBJECT IDENTIFIER for accessing the VlanConfigPorts is:

OID 1.3.6.1.4.1.97.9.20.6.4.1.3

4.3.5 IP (VlanConfigIP)

The IP address to be used to access the unit on this VLAN. This must be a valid host address.

els10-27VlanConfigIP OBJECT-TYPE

SYNTAX IPADDRESS

ACCESS read-write

STATUS mandatory

::= { els10-27VlanConfigEntry 4 }

The MIB OBJECT IDENTIFIER for accessing the VlanConfigIP is:

OID 1.3.6.1.4.1.97.9.20.6.4.1.4

4-7