
Enhancements to LCM Commands
2.5.4 Switch Command
The SmartSTACK Ethernet
NOTE |
Prior to changing to 802.1Q mode, all Workgroups must be deleted. When in 802.1Q mode, do not configure any workgroups.
switch | [802.1D 802.1Q] |
| |
| [back[pressure] {on off}] |
The command by itself displays the following:
The present switch mode is: 802.1d
The switch mode upon the next reboot will be: 802.1d
The forwarding mode in use is: Store and Forward
Backpressure is off