Workgroup MIB Objects

7.2.5.3 Ports (WorkGroupPorts)

This is a list of all ports within the Workgroup. From left to right, the first octet specifies ports 1-8, the second octet specifies ports 9-16, the third octet specifies ports 17-32 and the fourth octet specifies ports 24-27.

When create or add is used, you must provide a list of ports to be included in the Workgroup. For example, if you want to include ports 1 through 4 in the Workgroup, you would use the following octet: 0XF0000000.

When delete is used, it must be a non-zero value. Regardless of the value, all ports will be removed, and the Workgroup deleted. The user is not allowed to perform a partial delete.

els10-27WorkGroupPorts OBJECT-TYPE

SYNTAX OCTET STRING (SIZE 4 Bytes)

(00 00 00 00 ) (1-89-1617-2324-27)

ACCESS read-write

STATUS mandatory

::= { els10-27WorkGroupEntry 3 }

The MIB OBJECT IDENTIFIER for reading the VLANVersionNumber is:

OID 1.3.6.1.4.1.97.9.14.4.1.3

7.2.5.4 Type (WorkGroupType)

This is the type of Workgroup action (create or delete). If you want to create or add, enter a value of 3. This creates or adds using the values in the three preceding variables. If you want to delete, enter a value of 4.

els10-27WorkGroupType OBJECT-TYPE

SYNTAX INTEGER STRING (3=Create, 4=Delete)

ACCESS read-write

STATUS mandatory

::= { els10-27WorkGroupEntry 4 }

The MIB OBJECT IDENTIFIER for reading the VLANVersionNumber is:

OID 1.3.6.1.4.1.97.9.14.4.1.4

7-6

Page 90
Image 90
Enterasys Networks ELS10-27TX manual Ports WorkGroupPorts, Type WorkGroupType