Enhancements to LCM Commands

2.5.2 Route Command

A default gateway field was added to the route command to allow communication to a device on a subnet not configured on this switch. The gateway address must be for a subnet already configured on this switch. A VLAN ID is not necessary for the gateway as it will use the VLAN ID associated with the subnet address already configured.

The syntax is:

route [add del GATEWAY-ADDR]

[display [IPADDR]]

Refer to the VLAN Command or IP Address Command to associate a VLAN with an IP subnet address.

2-6

Page 36
Image 36
Enterasys Networks ELS10-27TX manual Route Command