JVC VR-X1600U manual Occurrence of an event, Event can be recorded. You can specify units, Seconds

Item

Preset Values

Description

Camera (Camera Properties) (continued)

Video	Video Properties
		Configure Video ^	Click to display the [Video Properties] screen.
		Properties	Make detailed display settings for the selected camera.

				Note:
				● The displayed items and initial settings differ
				depending on the camera. For details, see the
				instruction manual of the camera.
		Preview	^	For displaying the preview.
Audio	Audio	Default	^	This setting is applicable when microphones and/or a
	selection	microphone		speaker are used. Available microphones/speakers
				vary depending on the camera.
		Default speaker	^
Recording	Recording	Recording	Always	Always: Select this check box to always record images.
Properties		settings	Never	Never: For recording images manually without
			Conditionally	recording settings.
				Conditionally: For setting the conditions to record
				images.
				● Default value varies depending on the camera.
				● Configure settings below when you select
				[Conditionally].
		Built-in motion	Select check box	Select this check box to record all images where any
		detection	 Do not select	motion is detected.
			check box
		Event	Select check box	Select this check box to start recording at the
			 Do not select	occurrence of an event.
			check box	● If the [Event] check box is selected, set the start
				event and stop event.
		Start event	^
		Stop event
		Configure	Hardware input	Select an event and click [Open] to display the settings
		Events	events	screen for the selected event.
			Manual events
			Generic events
			 ^
		Enable pre-	Select check box	Images before/after the occurrence of motion or an
		recording	 Do not select	event can be recorded. You can specify units of
			check box	seconds to record before/after the occurrence.
				● Default value varies depending on the camera.
		second(s)	^
		Enable post-	Select check box
		recording	 Do not select
			check box
		second(s)	^

95