JVC VR-X3200U, VR-X1600U 142, Viewing Live Images, Showing the Live Window, Click the Live tab

<Viewer Part> Basics

Viewing Live Images

Showing the Live Window

1 Click the [Live] tab

The live window appears.

1 6 5

4

2		3
	Item		Description
A [Live] tab			For displaying the Live
			window.
B Operation section			(A Page 143)
C Camera images			Live images from the camera
D View			Segmented display of images
			from multiple cameras
E [Close] button			For closing the Smart Client.
F View list			For switching views.

●If you configure camera recording settings without closing the live window, live images may not be displayed correctly after you configure the camera recording settings.

In this case, “Cannot connect to server! Retry” or “Cannot connect to 127.0.0.1:80 on [device name] (camera name)” will be displayed in the live screen. (127.0.0.1:80 is an internal IP address of this unit during operations.)

Note:

●It may take a while to show images from cameras depending on the network line status.

●It may take several minutes to show the live image display screen depending upon the number of additional HDD(s) connected.

To check the camera status

Check the status from the 3 color box indicators and the characters that indicate camera operation status on the blue bar at the top of the window of each camera.

12 4 3

	Item	Description
A Camera operation status indications
	Live (green)	For indicating that live images
		are being displayed without
		recording.
	Recording (red)	For indicating that images are
		being recorded.
	Stopped (yellow)	For indicating that images
		cannot be acquired form the
		camera or the camera is offline.
B Event indicator		Turned on when any event
	(left: yellow)	occurs. If no event is specified
		or exists, the indicator remains
		in black.
C Motion indicator		Turned on when any motion is
	(center: red)	detected.
D Live indicator		Blinking each time it receives
	(right indicator:	images from the camera.
	green)

Note:

●To enlarge the camera window, double-click the upper blue bar. To restore the original size, double-click the upper blue bar again.

●Click the active event or motion indicator to turn off the indicator. You can hide the live indicator in "Display settings" (A Page 172)

142