31
This section describes procedures to setup an IP address for
this unit and connect to the camera network (LAN1) and
monitoring PC (LAN2).
䢇Also setup an IP address for each of LAN1 and LAN2.
Caution:
●Install and setup network cameras before network setup
for this unit.
1 Click the [Start] button on the desktop, followed
by clicking [Control Panel]
The control panel opens up.
2 Click [Network and Internet]
●If [Category] is not displayed, select [Category].
The [Network and Internet] window appears.
3 Click [Network and Sharing Center]
4 Click [Change adapter settings]
5 Right click on an adapter and click [Properties].
●To setup LAN1: Select AIntel(R) 82578DM Gigabit
Network Connection.”
●To setup LAN2: Select ARealtek RTL8168D/8111D
Family PCI-E Gigabit Ethernet NIC (NDIS 6.20).”
6 Select [Internet Protocol Version 4 (TCP/IPv4)]
and click [Properties]
Connect This Unit to a Network