59
6 Specify units of seconds to record before/after
the occurrence
7 Click [OK]
Note:
●A group of images before/after any motion/event is called
a sequence.
●
For how to use a sequence, refer to "Searching from the
Image List" (
A
Page149) "Searching for Recorded
Images" (
A
Page15 1).
Any abnormality in this unit or monitoring system can be
notified through e-mail.
Use 2 windows to configure mail settings.
䢇Notifications related to hardware
●Formatting of built-in HDD
●Formatting of external HDD
●Deterioration of built-in HDD reliability
●RAID abnormality (if applicable)
●Detection of heat radiation stoppage
䢇Notifications from Management Application or
Smart Client
●Motion detection
●Event occurrence
●Disconnection and restoration of communication with
cameras
●Archive error occurrence
Mail Settings of Unit Setting1 Double-click [4. Unit Setup] on the desktop
The [Unit Setting] window appears.
Item Description
Enable pre-recording
To record images before any
motion/event, select this check
box and enter units of seconds
for recording.
Enable post-recording
To record images after any
motion/event, select this check
box and enter units of seconds
for recording.
Configuring Mail Settings