JVC VR-X1600U, VR-X3200U 153, Playing back Recorded Images,  To skip parts with no recording

Playing back Recorded Images

This section describes procedures to perform playback, stop, and skip operations in the [Time Navigation] section of the Smart Client.

Note:

●If the [Time Navigation] section is not displayed, click [ ] to display it.

Functions of buttons and sliders are as follows.

Browse buttons

:Move to the previous image of the selected camera. (Frame rewind)

:Move to the next image of the selected camera. (Frame advance)

Move to the top image of the previous sequence of the selected camera. (The function may not

:work properly depending on the existence or length of the sequence.)

Move to the top image of the next sequence of

:the selected camera. (The function may not work properly depending on the existence or length of the sequence.)

Move to the oldest recorded images of the selected camera. (The function may not work

:properly during playback at 10 or more times faster than normal)

Move to the latest recorded images of the selected camera. (The function may not work

:properly during playback at 10 or more times faster than normal)

Caution:

●The browse buttons are inactive unless a camera is selected.

●It may take a while to complete movement after you click

the browse buttons . Note that clicking any of the buttons in a row before completion of the movement will move the sequence as a whole.

[Time] slider

Drag the slider to the left to show older images and to the right to show newer images. Use the upper slider for fine adjustment in a limited time span (0.4 to 240 times), and the lower slider for rough adjustment in a longer time span (20 to 36,000 times).

[Playback] slider

Playback speed is normal with the slider at the center position. Drag the slider to the left to decrease the playback speed and to the right to increase the speed. Drag the slider to the left end to pause.

The speed during playback is indicated in the upper right in the master time display part.

[Playback] buttons

:For reverse playback.

:For normal playback.

:For pausing playback.

Note:

●When the playback slider is at the left end (pause), the playback buttons are inactive. Set the playback slider to a preferred speed.

To skip parts with no recording

You can skip parts with no recorded images on the selected camera during playback by selecting the [Skip gaps during playback] check box in the [Time Navigation] section.

●When in split screen display, even when there are no images recorded by the selected camera, if there are images recorded by another camera this part will not be skipped. In this case, the image shown last is displayed on the camera with no recording.

153