<Recorder Part> Basics

Mounting to a Rack

This section describes procedures to use the supplied rack mount bracket to mount this unit to the EIA rack. For the installation to the rack, consult the specialist or dealer.

1 Mount the rack mount bracket using screw A

Use the 6 screws (M4 x 11 mm) supplied to fasten this unit on both sides.

2

3

Remove the foot screws B (4 pcs) on the bottom of the unit

Remove the foot.

Mount to the rack using screws C

Use the 4 screws (M5 x 10 mm) supplied to fasten this unit to the rack.

Rack mount bracket

4 screws

Caution:

Do not place any object on this unit when it is mounted to the rack. Doing so may cause it to lose balance and drop or fall, resulting in injuries or damage.

When mounting more than one of this unit to the rack, make sure to mount each at a distance that is at least equivalent to one U.

When remounting the removed foot, make sure to use the same screws (M3 x 6 mm). Using a longer screw may cause malfunction.

24

Page 30
Image 30
JVC VR-X3200U, VR-X1600U Mounting to a Rack, Mount the rack mount bracket using screw a, Mount to the rack using screws C