JVC VR-X3200U, VR-X1600U manual  Do not select,  Unlimited,  20Units,  10 sec,  60 sec

<Recorder Part> Reference

	Item	Preset Values	Description
NAS Setting (A Page 75)			For configuring settings for NAS connection.
	User name	^	For specifying the user name for NAS connection.
	Password	^	For specifying password for NAS connection.
IP	Lease Setting		For configuring settings to assign IP addresses to each network camera from
			this unit.

					Note:
					● In order to assign the IP address of the network camera using the IP
					Lease feature, you need to enable the DHCP of the network camera. For
					procedures to enable the DHCP of the network camera, refer to the
					instructions of the network camera.
					● If the network uses more than one of this unit, enable the IP lease function
					only for one unit. Also, do not enable the IP lease function when any DHCP
					server is running on the same network. Enabling the IP lease function for
					more than one unit may cause IPs to be fixed, leading to malfunction of
					cameras.
	IP Lease feature
		Enable IP Lease	 Select check box		Set whether to assign IP addresses to each network camera from this unit.
			Do not select check
			box
		Delete past IP	Select check box		Select this check box to delete past IP information of each network camera
		information	 Do not select		and to assign the new IP address.
			check box
	Lease period		 Unlimited		For specifying the valid period of the IP address assigned to the cameras.
			Limited (24H)
	Parameters
		Head IP address	 192.168.0.100		For specifying the first IP address to be assigned to the network cameras.
		Number	1 to 99 units		For selecting the number of IP addresses to be assigned to the cameras.
			 20Units		The selected number of IP addresses will be assigned starting from the first
					IP address.
		Subnet mask	 255.255.255.0		For specifying the subnet mask for the cameras.
		Gateway	 192.168.0.254		For specifying the gateway for the cameras.
		Primary DNS	 192.168.0.253		For specifying the primary DNS for the cameras.
		Secondary DNS	 192.168.0.252		For specifying the secondary DNS for the cameras.
		Domain name	^		For specifying the domain name for the cameras.
SNMP Setting (A Page 126)				You can monitor the status of this unit from the SNMP manager on the
					surveillance computer.
	Enable SNMP		Select check box		Select this check box to enable the SNMP function.
			 Do not select
			check box
	Enable TRAP		Select check box		Select this check box to enable the TRAP function.
			 Do not select
			check box
	SNMP Manager IP		^		Specify the IP address of the SNMP manager.
	address
	Community name		^		Specify the SNMP community name.
					(1 to 32 characters. Alphanumeric characters only.)
	Monitoring interval
		CPU Load	10 to 9999 seconds		Specify the interval to monitor CPU usage.
			 10 sec
		D drive writing	30 to 9999 seconds		Specify the interval to monitor the writing rate to the D drive.
		rate	 60 sec
		Smart Client	10 to 9999 seconds		Specify the interval to monitor the startup status of the Smart Client.
			 10 sec
		Camera status	60 to 9999 seconds		Specify the interval to monitor the connection status of the camera.
			 60 sec
	Copy extended MIB file to flash memory			Copy the MIB extension information into a USB flash memory.
					● For details on SNMP settings, refer to "Setting SNMP" (A Page 126).

82