JVC VR-X1600U, VR-X3200U manual 145, Other Useful Features

Playing Back Recorded Images for Specific Camera(s) (Independent Playback)

In the [Live] tab, you can view live images of all cameras.

By using the independent playback function, you can switch to view past recorded images on specific camera(s) only.

●Independent playback function can be used for multiple cameras.

●Independent playback function can also be performed from the view in the [Playback] tab.

1Point the cursor to camera images in the view

The independent playback start button appears on the camera images.

2Click the independent playback start button

The camera’s title bar turns yellow and playback pauses. To start playback, click [ ] to the right of the time and date display.

3 Search for images you want to view

			1
4		2	3	2	5
	Item			Description
A Time		For displaying the date and time when the
	and date	image was recorded.

BFor reverse/normal playback

●Click once to use them as pause buttons.

C Slider	For changing playback speed during playback.
	● Audio sounds will not be played back.

DFor switching to the playback view at the time of the present recorded image.

E For finishing independent playback.

●The controller disappears when the cursor goes out of the camera images.

4 Click [] to finish independent playback

The color of the title bar returns to normal.

Note:

●If the camera window is displayed small, the slider is not displayed. In this case, display the slider by maximizing the Viewer or double-clicking the bar on the upper edge of the camera window to enlarge it.

Other Useful Features

Speech communication

A speech communication feature is available from the [Audio] section with a microphone or a speaker is installed to the camera.

Note:

●If the [Audio] section is not displayed, click [ ] to display it.

To hear audio sounds from a microphone installed to the camera, select the microphone from the [Listen to] list.

●Select the [Mute] check box to temporarily mute the microphones.

To talk to the other party through a speaker installed to the camera, select the speaker from the [Talk to] list. Select [All Speakers] to talk to all speakers at the same time.

●During talking, keep [Talk] clicked.

●Talker’s volume level can be checked from the level meter.

Caution:

●Audio sounds may be interrupted when more than one surveillance computer listen to the sounds.

●When you return from the setting screen to the live image display screen, the microphone and/or speaker are deselected. Select them again if necessary.

●If the network is congested, audio sounds may not be transmitted.

Note:

●If any camera for which an audio source is specified in [Audio] under [Camera Properties] of [Hardware Devices] is selected, the specified audio sounds are output.

(A Page 95)

●If you select the [Lock to selected audio devices] check box, the current microphone and/or speaker will remain selected when you select another camera with a microphone and/or speaker.

●Select the [List only devices from current view] check box to list the audio devices in the view only.

●If any camera for which an audio source is specified is selected, the last audio sound output will be used continuously.

●When live images are displayed at the same time as recording, images and sounds may be out of synchronization. (This does not affect recording to this unit of additional HDD.)

145