94
<Recorder Part> Reference
Camera (Camera Properties)
Camera
Properties
General
camera
settings
Enabled Select check box
Do not select check
box
Select this check box to use this camera. Default value
varies depending on the camera.
Camera name ^The name is used to identify the selected camera. Do
not assign the camera name already used for other
devices.
●The “Camera name” is not the name specified for the
camera unit, but for identifying the camera on this
unit.
●The following characters cannot be used.< > & ' " \ /
: * ? | [ ]
Camera
shortcut number
^For specifying the camera number.
●Do not assign a camera number that is used by other
cameras.
Frame rate Frame rate
selection
(MJPEG)
Regular frame
rate:
Live frame rate
1 to 10, 15, 20, 25,
30,
Second, Minute, Hour
䢇20 Second
For specifying the frame rate for live display.
Regular frame
rate:
Recording frame
rate
䢇10.00 Second For specifying the frame rate for recording.
● The values that can be specified differ depending on
the settings for [Regular frame rate: Live frame rate].
●You cannot specify values larger than [Regular frame
rate: Live frame rate].
Enable speedup Select check box
䢇Do not select
check box
Select this check box to use the speedup function.
●The speedup function is enabled by [Motion
detection] or [Event].
Speedup frame
rate:
Live frame rate
䢇20 Second For specifying the frame rate for live display when the
speedup function is enabled.
●The values that can be specified differ depending on
the settings for [Regular frame rate: Live frame rate].
●You cannot specify values smaller than [Regular
frame rate: Live frame rate].
Speedup frame
rate:
Recording frame
rate
䢇10.00 Second For specifying the frame rate for recording when the
speedup function is enabled.
●
The values that can be specified differ depending on
the settings for [Speedup frame rate: Live frame rate].
●You cannot specify values larger than [Speedup
frame rate: Recording frame rate].
On motion Select check box
䢇Do not select
check box
For specifying whether or not the speedup setting is
enabled to increase the frame rate for recording when
any motion detection or event occurs. Select this check
box to enable it.
●If the [Event] check box is selected, set the start
event and stop event.
On Event Select check box
䢇Do not select
check box
Start event 䢇^
Stop event
Configure
events
Hardware input
events
Manual events
Generic events
䢇^
Select an event and click [Open] to display the settings
screen for the selected event.
Caution:
●Be sure to set the frame rate so that the total frame rate does not exceed the performance capacity of this unit. For the
performance of this unit, see ARecording/Displaying live images/Distribution performanceB (APage 196).
Item Preset Values Description