SMC Networks TigerCard 1000 manual Installing Network Drivers

INSTALLING NETWORK DRIVERS

3.Double-click on the “My Computer,” “Control Panel,” and “Network” icons. The “Network Configuration” window appears, prompting you to install Windows NT Networking. Select “Yes.” Windows NT invokes the “Network Setup Wizard.” Click on “Next.”

4.When prompted to “Search for a Network Adapter,” click on “Select from List.”

5.When prompted to “Select a Network Adapter,” click on “Have Disk.” Insert the SuperDisk when prompted and click on “OK.”

6.You are presented with the “Select OEM Option” window. Highlight “TigerCard 1000” and click on “OK.”

7.When prompted to “Search for an Adapter,” click on “Next.”

8.Select network protocols when prompted and click “Next.”

Note: To complete a TCP/IP installation, you will need to know your IP Address and Subnet Mask. For further information, contact your network administrator or Internet service provider.

9.Click on “Next” and then “Next” again when prompted to “Install Network Components.” When prompted for Windows NT files, type the path to your Windows NT CD-ROM installation files (e.g., D:\WINNT), and click on “OK.”

10.You are presented with the “Network Card Setup” window where you can specify the network card data rate. “AUTONEGOTIATE” is the recommended setting for the TigerCard 1000 network card. Select “Continue” after verifying the network card settings.

11.Click on “Next” and then “Next” again when prompted to “Start the Network.”

2-2