CONFIGURING AND TESTING THE NETWORK CARD
Network Card Diagnostics
Select the “Diagnostics” tab in the utility window to test the basic functions of the network card and its ability to communicate over the network with another card.
Local Tests
These tests can be used to test the basic functions of the network card. Select the “Run Loopback Tests” and “Run Internal Tests” check boxes either together or separately. The tests to be performed will show “Ready” as the status in the test list box. Then click on the “Run Local Tests” button to start the tests. The progress of each test is shown by the “Test Progress” status bar. When the tests are complete, click on the “View Test Results” button to display the test results.
