2-5

I
NSTALLING

N

ETWORK

D

RIVERS
Novell NetWare Installation

NetWare Server 5.0

Installing the LAN driver is part of the NetWare installation process.
Use the following instructions with those in the NetWare
installation manual to install the driver. You will need the SMC
SuperDisk during this procedure.
1. Shutdown your computer and install the TigerCard 1000
network card in a PCI slot. Connect the card to the network
using fiber optic cable.
2. Turn your computer on and boot it to the NetWare 5.0 console
prompt.
3. At the NetWare console prompt enter the command “load
nwconfig” to start the install utility. The Installation Options
dialog box is displayed.
4. Select the Driver Options menu item and press enter. The
Driver Options dialog box is displayed.
5. Select the Configure Network Drivers menu item and press
enter. The Additional Driver Actions dialog box is displayed.
6. Insert the SMC SuperDisk driver diskette into the “A” drive.
7. Select the “Load an additional driver” menu item option and
press Enter. The “Select a driver” dialog box is displayed. Press
the “Ins” key to Install an unlisted driver. A dialog box
indicating the A drive will be scanned for drivers is displayed.
Press Enter to continue.
8. Press Enter to select the SMC9462.LAN from the “Select a
driver” to install dialog box. A message asking if you want to
copy the driver is displayed. Select “Yes” to continue. The
device driver is copied.