Ask Proxima 9100 Changing the language on the menus, Saving your settings, Adjusting The Image

For most settings, you make incremental adjustments by moving a slide bar. To move a slide bar, press the edges of the MouseDisk, press the up and down arrow keys on the projector’s control panel, or use the optional Cyclops wand or laser pointer.

Changing the language on the menus

To change the menus to a different language, choose Language on the Preferences menu. Then choose the language you prefer. You can select between English, Spanish, French, German, and Italian. The menus instantly change to the language you selected.

Saving your settings

Your current settings are saved when you exit the menus. Your settings will also be saved if you hold the key for two seconds (to turn off the lamp).

If two or more presenters want to save their settings separately, see Advanced Features.

Reverting to the factory defaults

If you want to revert to the original factory settings for a specific computer source, choose Image, Factory Defaults, Reset.

To reset the projector itself , press the Clear key, then press each of the four arrow keys on the projector’s control panel once. The power LED indicator will blink twice to indicate the projector has been reset.

ADJUSTING THE IMAGE

Press the Setup key to access most of the settings you need to adjust the image.

Note: The choices on the Setup menu vary, depending on your current input source.

Adjusting the brightness

To adjust the brightness, press the Setup key until the Brightness slider appears. Press the edges of the MouseDisk, use the optional Cyclops wand or laser pointer, or press the left and right arrow keys to move the slider.

You can also adjust the brightness by accessing the projector menus and choosing Bright from the Image menu.

Using Your Projector 2-5