Ask Proxima 9100 manual DEC 3C3 Video Connections, BNC Video Connections, R G B H V

DEC 3C3 Video Connections

If you have a DEC workstation with 3C3 connectors at the computer and monitor video ports:

Figure 1-19, 3C3 connector

1Disconnect your computer-to-monitor cable at the computer end.

2Connect the free end of the monitor cable to the Proxima DEC 3C3 to LCD adapter (C947-10).

3Connect the free end of the DEC 3C3 to LCD adapter to the projector’s COMPUTER OUT connector.

4Use the Proxima DEC 3C3 to LCD connector cable (C948-6) between the projector and the computer. Connect the end marked “LCD” to the projector’s COMPUTER IN connector, and the end marked “COMPUTER” to the workstation’s video output connector.

BNC Video Connections

If your workstation does not have a 13C3 video port connector at the computer video port, but has a BNC connector at the monitor, you will need the optional Proxima BNC cables.

1Note which BNC connectors are currently used with the monitor. (The R, G, and B connectors are always used, but the way the H and V connectors are used depends on your configuration.) Disconnect your computer-to-monitor cable at the monitor (BNC) end.

2Connect the free BNC end to the optional Proxima BNC Block to LCD Connector Cable (C942-2), connecting the same BNC connectors used on the monitor. Plug the “LCD” end of the cable into the projector’s COMPUTER IN connector.

R

G

B

H

V

To Projector Computer Video Out

Figure 1-20, Using the BNC Block to LCD connector cable

Setting Up Your Projector 1-15