Ask Proxima 9100 Connecting The Projector To Your Computer, Port, Connects To, With This Cable

CONNECTING THE PROJECTOR TO YOUR COMPUTER

Take a moment to review the projector’s connector panel.

Audio 1 In Video 1 S-Video 1

Audio 2 In Video 2 S-Video 2

				MIC	Cyclops
	Computer		Audio Out
	Audio In
Computer In			Computer Out		VGA Out
Figure 1-10, The connector panel
PORT		CONNECTS TO...				...WITH THIS CABLE
AUDIO 1 In		Left and right ports connect to				Composite audio/video cable
AUDIO 2 In		a video source, brings audio				(C497-6).
		into the projector.
VIDEO 1		Connects the projector to a				Composite audio/video cable
VIDEO 2		video camera, laserdisc player,				(C497-6).
		television, or a VCR
		(NTSC/ PAL/SECAM source)
		to bring video from these
		sources into the projector.
S-Video-1		Connects the projector to an				S-Video cable (C466-6).
S-VIdeo-2		S-Video source to bring video
		into the projector.
COMPUTER		Left and right ports connect to				Computer audio cable (C498-6) .
AUDIO IN		the computer, brings audio
		into the projector.
AUDIO OUT		Connects to external speakers				Audio cable.
		or an external sound system to
		send stereo audio out.
CYCLOPS*		Connects to the computer to				RS-232 cable (PC C936-6),
		use the Cyclops F/X software				(MAC C470-6), (Workstation C902-6
		or the optional Cyclops				and C903-6).
		interactive pointer system.

*Instructions for connecting to this port are also included in the Cyclops User’s Guide.

Setting Up Your Projector 1-7