Ask Proxima 9100 manual ADJUSTING THE IMAGE Raising or lowering the image, Focusing the image

In the unlikely event that an overtemperature conditions occurs, see Chapter 6, Troubleshooting for information on restarting your projector.

ADJUSTING THE IMAGE

Raising or lowering the image

To raise or lower the projected image, tilt the mirror on top of the arm up (to move the image higher) or down (to move the image lower).

Focusing the image

To focus the image, rotate the ring just below the projection lens, beneath the mirror, until the image is sharp and clear.

Figure 1-29, Rotating the focus ring

Setting Up Your Projector 1-23