Ask Proxima 9100 manual 10, The screws at the top of the right side panel

6Locate the three screws at the top of the right side panel. Remove the screws and unsnap the panel, from the rear first.

Figure 5-10, The screws at the top of the right side panel

7The filters are now exposed (see Figure 5-11). Remove the retaining screw to access the rear filter. Pull the front filter out.

Figure 5-11, The two right side filters

To replace the covers, reverse steps one through five, taking care to align the top and side covers. Make sure to reattach the ribbon cable before you replace the top cover. The ribbon cable is keyed, so it will only reattach on one side. Also, make sure that the arm release lever is in the release position (fully to the left) before you replace the top cover.

Maintenance 5-9