Panasonic VDR-D100 Editing To complete the settings, To cancel all Dpof settings

Editing still pictures (VDR-D200 only)

DPOF setting

This is for writing the printing data on an SD card.

(SD) You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD card.

¬Rotate the mode dial to select .

1Press the MENU button, then select

[ PLAY SETUP] # [ DPOF SET] # [SET] and press the joystick.

2Select the file to be set, then press the joystick.

The number of prints set to be in DPOF is displayed.

3 Move the joystick up or down to select the number of prints, then press the joystick.

≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF.)

≥To cancel the setting, set the number of prints to [0].

≥To set other files, repeat steps 2–3.

Editing

To complete the settings

Press the MENU button.

To cancel all DPOF settings

Press the MENU button, then select [PLAY SETUP] # [ DPOF SET] # [CANCEL ALL] and press the joystick.

≥When the confirmation message appears, select [YES], then press the joystick.

∫What is DPOF?

DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF.

≥ The DPOF setting can be established for up to 999	≥ You cannot add the recording date to pictures to be
files.	printed with the DPOF settings.
≥ DPOF setting made on other devices may not be
recognized by this unit. Please perform the DPOF
settings on this unit.

82

LSQT0969