Appendix C: Software Installation Instructions

C-19

m. After Windows OS Installation is completed, the system will automati-
cally reboot.
C-2Installing Intel's 6300 ESB Driver by Adaptecand the OS
f. Insert Microsoft Windows OS Setup CD in the CD Driver, and the
system will start to boot up from CD.
g. Press the <F6> key when the message-"Press F6 if you need to install
a third party SCSI or RAID driver" displays.
h. When the Windows OS Setup screen appears, press "S" to specify
additional device(s).
i. Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller
Driver" into Drive A: and press the <Enter> key.
j. Choose Adaptec Embedded Host Serial ATA Raid Controller from the list
indicated in the Windows OS Setup Screen, and press the <Enter> key.
k. Press the <Enter> key to continue the installation process. (If you need
to specify any additional devices to be installed, do it at this time.) Once
all devices are specified, press the <Enter> key to continue with the
installation.
l. From the Windows OS Setup screen, press the <Enter> key. The OS
Setup will automatically load all device files, and, then, continue the
Windows OS installation.
a. Insert Supermicro's bootable CD that came with the package into the
CD Drive during the system reboot, and the screen:"Super Micro Driver
Diskette Maker" will appear.
b. Choose from the list the item: "Intel 6300 ESB Driver by 3rd Party
(Adaptec)" and press <ENTER>.
c. From the next screen displayed, choose the OS driver you want to
install and press <Enter>.
d. Insert a formatted diskette into drive A: and press <Enter> as
prompted.
e. Exit the program after the process is completed. Then, reboot the
system.