1-6

Introduction
X6DVA-4G/X6DVA-EG User's Manual
Motherboard Features
CPU
• Single or dual Intel® 604-pin 32-bit/Ext. EM64T NoconaTM (up to 3.6
GHz) processors at 800 MHz front side (system) bus speed.
(*Notes: CPU FSB speed is set by Manufacturer. Please do not change the FSB setting. )
Memory
• Six 184-pin DIMM sockets supporting up to 12/24 GB Registered ECC
DDR-333/266 (PC2700/PC2100) SDRAM required
Notes: 1. Memory size is set via BIOS. 2. Interleaved memory; requires memory modules to be
installed in pairs. See Section 2-3 for details.
Chipset
• Intel E7320 (Lindenhurst-VS) chipset with support of: MCH, PXH and
6300ESB ICH
Expansion Slots
• One PCI-E slot (*x4@2GB sec)
• Two 64-bit PCI-X slots (*One 64-bit PCI-X-133 slot, one PCI-X-100 slot)
• One 32-bit PCI slot
BIOS
• 8 Mb AMI® Flash ROM
• APM 1.2, DMI 2.1, PCI 2.2, ACPI 2.0, Plug and Play (PnP), SMBIOS 2.3
PC Health Monitoring
• Onboard voltage monitors for CPU cores, chipset voltage, Memory
voltage, 3.3V, +5V, +12V,−12V, 3.3V standby and 5Vstandby
• CPU/chassis temperature monitors
• Environmental temperature monitor and control via Supero Doctor III
• CPU slow-down on temperature overheat
• CPU thermal trip support for processor protection, +5V standby alert
LED
• Power-up mode control for recovery from AC power loss
• Auto-switching voltage regulator for CPU core
• System overheat LED and control
• Chassis intrusion detection
• System resource alert via Super Doctor III
• TM2 Feature
• Fan Control (Please refer to the section-"Hardware Monitoring" in BIOS