American Power Conversion 10-40kW 208/480V instruction

APC Silcon

10-40kW 208/480V UPS

User Guide

Copyright ©2000 APC Denmark ApS

Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor

Image 1

American Power Conversion manual APC Silcon 10-40kW 208/480V UPS User Guide, Copyright 2000 APC Denmark ApS

Contents

Copyright 2000 APC Denmark ApS APC Silcon 10-40kW 208/480V UPS User Guide User Guide APC Silcon 10-40kW 208V/480V UPS Safety Symbols used in this manualThank You Contents Introduction IntroductionDisplay Unit Stop UPS for stand-by Stop/Start UPS and Operating the External Service BypassStart UPS from stand-by Switching off the UPS Stop UPS for complete power down UPS start-up Start UPS from complete power down System start-up now completed Bypassing the Single System UPS Operating the External Service Bypass Switch single systems UPS YES Bypassing the Parallel UPS System All UPSs Acoustic alarm sounds for 30 secs Stop/Start UPS and Operating the External Service Bypass Set input switches Q001 to position Isolating one UPS in a Parallel/Redundant System Operation OperationKeyboard Batt. load Batt. tank Display of Measured Values Economy Mode Using the Remote Display Parameter Settings Parameter SettingsParameter Settings Programming Keys Switching to Bypass OperationProgramming Example Load power xx% Alarms and Events Alarms and EventsDisplaying the Alarm Stack Mode Comments Displaying the Event Stack Possible Alarms Temperature of main inverter, too Unlock Parallel Operation Alarms Rectifying Alarm MessagesCorrection of false alarm situations during service Maintenance & Testing Maintenance & TestingBattery Monitoring Test Battery Capacity Test Until Warranty WarrantyAPC Silcon UPS Limited Factory Warranty How to Contact APC How to Contact APCAPC Corporate APC Denmark