Introduction
About this unit
The American Power Conversion (APC®) SURT192RMXLBP2 external battery pack (XLBP) connects to an APC
Unpack package contents
Read the Safety Guide before installing the unit.
Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
The unit is heavy. Remove the batteries from the cabinet prior to unpacking and installing the unit. Refer to battery removal instructions on the packaging.
Check the package contents:
• | External battery pack | • Literature kit containing: | • | |||
• | Front bezel | – | Product documentation | – | Four ornamental screws | |
• | Ground wire | – | – Eight flat head screws | |||
• | Four tie brackets | – | Safety information | – | Two cage nuts | |
• | Sixteen ornamental screws | |||||
– | Warranty information | – | Two rail cleats | |||
|
| |||||
|
|
|
| – Four pan head screws | ||
|
|
|
| – Two | ||
|
|
|
|
|
| |
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.
Hardware
4
8
20
2
2
2
4
pan head screws for securing rail cleats to unit
Flat head screws for securing
Stack configuration:
ornamental screws for securing tie brackets to units
ornamental screws for securing units in rack
Rail cleats
Stack configuration only:
tie brackets for stabilizing units
SURT192RMXLBP2/SURT192XLBP2 6U User Manual | 3 |
