American Power Conversion AFX Series Configuration, Front access, Humidity control, Compliance

Configuration	Air-cooled.Unit used with an air-cooled condenser. Refrigerant lines must
	be run between the indoor unit and the condenser. Air cooled units require
	low maintenance and have low operating costs.
	Configurations are:
	•	Air-cooled with remote outdoor condenser.
	•	Air-cooled with indoor floor mounted condenser.
	Water-cooled.Unit used with a cooling tower or other source of water. Field
	refrigeration piping is eliminated by a factory sealed and tested system. Water
	piping to and from the unit is required.
	Glycol-cooled.Unit used with a drycooler. The need for field refrigeration
	piping is eliminated by a factory sealed and tested system. The glycol piping
	is sealed, eliminating costly water treatment often encountered with open
	cooling towers.
	Remote-condensing.Unit used with a remote air-cooled condensing unit
	which includes the compressor(s). This allows key maintenance procedures
	to be located outside the critical environment helping eliminate access by
	maintenance personnel in high security areas.
Front access	The AFX Series has full service front access for routine servicing of
	components. Front access also narrows the footprint of the unit making it
	possible for units to be placed side by side.
Humidity control	Humidity is managed through a self-contained steam canister humidifier for
	maximum efficiency and ease of maintenance. Dehumidification control is
	assured with a split evaporator coil which decreases the humidity level
	without over-cooling the space, therefore reducing the need for electric
	reheat.
Compliance	The AFX Series has received agency approvals by ETL and MEA #223-99-E.
	Electrical systems comply with NEC and UL 1995 standards.

4 APC NetworkAIR AFX Series: Overview