Operation
Display interface (AP7862J only)
|
|
- OK
- Warning
- Overload
Reset
L1 L2 L3
Amps
Press to select line.
and hold to invert display.
Amps
Link - Rx/Tx
10/100
Status
Serial Port
|
Phase Indicator LEDs:
•Indicates the phase corresponding to the current listed in the digital display.
•Indicates normal (green), warning (yellow) or alarm (red) condition.
Control button:
•Press to change the phase of the current displayed on the digital display.
•Press and hold for five seconds to view the orientation; hold for an additional five seconds to change the orientation.
•Press to silence an alarm.
Ethernet port: Connects the PDU to your network, using a CAT5 network cable.
Status LED: Indicates the status of the ethernet LAN connection and the state of the Metered PDU.
Link LED: Indicates whether there is activity on the network.
Serial port: Access internal menus by connecting this port
Display of the current used by the PDU and attached devices:
•Shows the aggregate current for the phase corresponding to the Phase Indicator LED that is illuminated.
•Cycles through all three phases in
Reset switch: Resets the PDU to its default settings.
Basic and Metered Rack Power Distribution Unit | 7 |
