| How to Install the Basic and Metered PDU |
| You can order a |
| brackets attach to the PDU in either of two directions, shown in the |
| figures in step 1. Consider the orientation of the PDU in the enclosure |
| before attaching the brackets. A recessed orientation allows the PDU to |
| be mounted flush with the enclosure; a raised orientation allows you to |
| route cables through the channel (see the figures in step 2). |
| 1. Attach two brackets to the rear of the PDU, using two |
| screws (provided in the bracket kit) for each bracket. |
| – Recessed orientation |
–Raised orientation
You can mount two PDUs on one side of the enclosure by using the raised orientation.
Note
Basic and Metered Rack Power Distribution Unit | 5 |