American Power Conversion RT 1000/2000 user manual Computer Inter Face Port Tvss Screw

REAR PANEL

TVSS Ground

Input Plug

Computer Interface Port

Fan

External Battery Connector Port

Outlets

BASIC CONNECTORS

Computer Inter-

face Port

TVSS Screw

Power management software and interface kits can be used with the UPS. Use only interface kits supplied or approved by APC. If used, connect the interface cable to the 9-pin computer interface port. Secure the connector screws to complete the connection.

Use the APC supplied cable to connect to the Computer Interface Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

The UPS features a transient voltage surge-suppression (TVSS) screw for connecting the ground lead on surge suppression devices such as telephone and network line protectors.

External Battery Connector Port

Input

Circuit Breaker

External battery packs can be obtained to connect to your UPS and give longer runtime during power outages. If used, unscrew the protective plate from in front of the connector port and insert the cable supplied with the bat- tery pack into the connector port. Battery Packs can be daisy chained to- gether to achieve desired run time.

To connect optional external battery pack(s) to the UPS, refer to the Smart- UPS RT Battery Pack User’s Manual for instructions. This Smart-UPS RT XL can support a maximum of ten external battery packs.

If the plunger on the circuit breaker pops out, reduce the load on the UPS by unplugging equipment and press the plunger in.

11 990-1060B 12/2005