2 MAKE WATER SUPPLY CONNECTIONS
Turn off hot and cold water supplies before beginning.
Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect
left supply to Hot and right supply to the Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten.
Faucet supplies are 10" long from faucet base.
Note: If additional supply length is required, installer must purchase additional parts separately.
Important: If SUPPLY HOSES (1, 2) are too long, loop as illustrated to avoid kinking. Figure A.
10" 
2
1
HOT
COLD
LOOP SUPPLIES
IF REQUIRED
Figure A.
HOT
COLD
3 DRAIN INSTALLATION
Apply a bead of PUTTY to underside of
DRAIN BODY FLANGE (1).
Feed DRAIN BODY (1) down through lavatory.
Assembly GASKET (2) WASHER (3) and LOCKNUT (4) onto DRAIN BODY (1). Tighten LOCKNUT (4) firmly.
Assembly TAILPIECE (5) to DRAIN BODY (1).
1
PUTTY 
2
3
4
5
M 9 6 8 8 4 7
