![Installation](/images/new-backgrounds/37593/375931x1.webp)
| Installation |
| Instructions |
ARDSLEY | 4962.150 |
TRADITIONAL VESSEL FAUCET | 4962.151 |
|
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI A112.18.1
M 9 6 8 8 4 7
Recommended Tools & Materials
| Adjustable Wrench |
| Plumbers' Putty or | Regular Screwdriver | Channel Locks |
|
|
| Caulking |
|
|
1 |
|
| Turn off hot and cold water |
|
|
INSTALL FAUCET | CAUTION |
|
| ||
supplies before beginning. |
|
| |||
|
|
|
For single hole only.
NOTE; The FAUCET with EXTENSION is used for installation with
With the collar of the EXTENSION (1) facing up slide the EXTENSION (1) over the FAUCET SUPPLIES (2) and the MOUNTING STUD (3). The collar of the EXTENSION (1) fits into the groove of the faucet.
Seat SEAL (4) into groove in EXTENSION (1) base. Feed FAUCET SUPPLIES (2) and MOUNTING STUD (3) through mounting hole of deck.
From below, push RETAINING WASHER and GASKET (5) onto MOUNTING STUD (3). Secure Faucet with MOUNTING NUT (6), pulling faucet to front of sink, so STUD (3) rests against mounting hole. Before final tightening, adjust faucet so that it is centered. Tighten MOUNTING NUT (6) to complete installation.
GROOVE (EXTENSION
BASE)
FAUCET
GROOVE
COLLAR
1
4
3
MOUNTING
SURFACE
5
6 2