Thank you for selecting
UNPACKING All American Standard Products Are Water Tested At Our Factory. Some Residual Water May Remain In The Valve During Shipping.
1.Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton. Some items may be packaged partially assembled to other items.
1. | Flush Valve Assembly | 5. | Sweat Solder Adapter |
2. Down Tube and Vacuum Breaker | 6. Cover Tube | ||
3. | Spud Coupling Nut and Washers | 7. | Wall Escutcheon |
4. | Spud Flange | 8. | Supply Stop |
|
| 9. | Installation Instructions |
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
DO NOT REMOVE PROTECTIVE FILM FROM SENSOR
EYE UNTIL INSTALLATION IS COMPLETE.
6
5
1
7
8
2
3
4
| Instructions | Exposed Flushometer |
|
|
| SELECTRONIC™ |
|
|
| PROXIMITY URINAL FLUSH VALVE |
|
|
| 0.5 & 1.0 GPF |
|
|
| MODEL NUMBERS | |
|
| 6063.510 | 6063.051 |
|
| 6063.505 | 6063.101 |
| Installation | for 3/4" Top Spud Urinals |
|
| M968567 Rev. 1.2 |
| |
|
| CLOG RESISTANT |
|
|
| • | |
9 |
| ONE SENSOR FITS ALL |
|
| • Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves. | ||
| • Range can be adjusted manually or with optional remote control. | ||
|
| • Sensor Features Low Battery Indicator. |
|
|
| Certified to comply with ASME A112.19.2M |
|
|
| © 2008 AS America, Inc. |
|
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Faucets visit our website at:
or U.S. customer's
For Parts, Service, Warranty or other Assistance,
please call
(In Toronto Area onlly::
1
M968567 Rev.1.2