4FLUSH OUT SUPPLY LINES; Fig. 6

1.Remove COVER (1) from SUPPLY STOP (2).

2.With a flat blade screwdriver open SUPPLY STOP (2).

3.Turn on water supply to flush line of any debris or sediment.

4.Close SUPPLY STOP (2) and replace COVER (1).

Fig. 6

2

REMOVE COVER

1

2

COUNTER-CLOCKWISE

OPENS CONTROL STOP

CLOCKWISE CLOSES

CONTROL STOP

45 LEFT OR RIGHT HAND INSTALLATION; Fig. 7

The UNIT is shipped with the inlet flange on the right side. If needed, the orientation can be reversed by following the steps below.

1.Loosen SET SCREW (1) with 2.5mm Hex Wrench (4) in back of top half of FLUSH VALVE (2). Fig. 7a.

2.Rotate TOP (2) to the right and pull off. Fig. 7b.

3.Rotate bottom half of FLUSH VALVE (3) 180˚. Fig. 7b.

4.Replace TOP (2) and rotate until key engages than tighten SET SCREW (1). Fig. 7c, 7d.

Fig. 7

 

 

 

 

2

2

1

RED+

 

 

 

 

BLACK-

4

 

3

 

 

Fig. 7a

 

Fig. 7b

 

 

180˚

 

2

 

 

 

KEY

 

Fig. 7c

 

4

1

 

Fig. 7d

4

 

M968567 Rev.1.2

Page 4 Page 6
Page 5
Image 5
American Standard 6063.051, 6063.505, 6063.510, 6063.101 Flush OUT Supply Lines Fig, Left or Right Hand Installation Fig
Page 4 Page 6

6063.101, 6063.510, 6063.051, 6063.505 specifications

American Standard 6063 is a widely recognized alloy within the aluminum family, playing a significant role in various industrial applications. This alloy is particularly esteemed for its versatile properties, which make it suitable for extrusion, fabrication, and other manufacturing processes.

6063.051 is characterized by its medium strength and excellent corrosion resistance. This variant also exhibits good surface finish and is commonly used in architectural applications where aesthetics are crucial. The alloy's superb workability permits complex shapes to be extruded with ease, making it a favorite in window frames, doors, and curtain walls.

6063.510 demonstrates increased strength and is often employed in structural applications. The unique blend of magnesium and silicon provides this alloy with greater tensile strength compared to other 6063 variants. This capability, combined with excellent weldability, makes it ideal for construction projects and heavy-duty applications. Industries benefit from its ability to withstand various environmental conditions, preventing premature failure in infrastructure components.

The 6063.101 designation represents a variation that favors excellent thermal conductivity. This characteristic is vital in applications like heat exchangers and other components where heat dissipation is crucial. The alloy benefits from enhanced forming capabilities, allowing for intricate designs and configurations, which are particularly important in specialized manufacturing sectors.

6063.505 provides a balance between strength and aesthetic appeal, making it suitable for both structural and decorative applications. Its inherent ability to take on a bright finish allows for its use in design elements where visual impact is essential. With advanced extrusion technologies, manufacturers can create complex and appealing shapes that meet specific design requirements.

Collectively, these 6063 variants showcase the flexibility and adaptability of aluminum alloys in modern manufacturing. Not only do they provide superior mechanical properties, but they also incorporate the latest technologies in extrusion to maintain high quality and performance. Their applications span multiple industries, including construction, automotive, aerospace, and consumer goods, underscoring the significance of each variant in delivering diverse solutions for engineers and designers. Each variant's unique features enables tailored applications, reinforcing the reputation of American Standard 6063 as a leader in the aluminum industry.
Top Page Image Contents