™
Installation Instructions
M A D E W I T H
CHANDLER™ APRON KITCHEN SINK
MODEL 7048 SERIES
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI Z124.6 Patent Pending
Observe local plumbing and building codes.
7 9 0 7 5 9 - 1 0 0 R E V A
BEFORE YOU BEGIN...Unpack new sink and inspect carefully for damage. Replace the sink in its original packing carton to protect it until you are ready to begin installation.
RECOMMENDED TOOLS & MATERIALS |
|
| |
Putty Knife | Phillips Screwdriver | Saber Saw | Tubing Cutter |
Pipe Wrench | Regular Screwdriver | Plumbers' Putty or | Tape Measure |
Channel Locks | Adjustable Wrench | Caulking | Hacksaw |
Drill | Basin Wrench | Various Carpentry Tools | Silicone Adhesive |
PRODUCT REQUIREMENTS
Due to the special nature of this installation, American Standard recommends that an experienced cabinet maker build the new cabinet or modify an existing cabinet to achieve a satisfactory installation.
To ensure proper fit of the sink in the cabinet, we suggest you provide the cabinet maker with the actual sink that will be installed.
NOTES
The cabinet designs illustrated below are intended as suggestions only. Your specific installation requirements may vary from those shown.
CABINET DESIGN
The sink is designed to be installed with the apron exposed and the back of the apron flush against the front of the cabinet.
SINK DIMENSIONS | |
| |
| HOLES TYP. |
C/L
(181mm)
7048.804
NOTE: Tile recess is designed to accept four
(222mm)
22
(558mm)
1 (25mm)
RAD. TYP.
|
|
|
|
| ||
(114mm) |
|
|
| (241mm) | ||
36
(914mm)
(157mm)
(622mm)
TILE RECESS
33 (838mm)
4HOLE VARIATION
SEALING
COMPOUND
3/8
(10mm)
(248mm)
FRONT OF
CABINET
6" x 6" x 5/16" thick tiles (by others). Secure tiles with silicone adhesive.
2
(51mm)
Product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
Corian® Dupont registered trademark
© American Standard Inc. 2004
