Order Entry and Sales
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)
Johnson City, TN 37602-4808
(800) 937-1037
FAX (800) 581-7224
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.

Distributed By:

Warranty and Service
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 1597 (Mailing)
Johnson City, TN 37605-1597
(800) 456-9805
FAX (800) 999-5210
BCADF8”
GAS VALVE
DRAIN VALVE HOT
CONNECTION
COLD
CONNECTION
ANODE ROD
ON/OFF SWITCH
FRONT VIEWTOP VIEW
DRAFT HOOD
T&P VALVE
1/2”
EResidential High Eciency GasResidential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard. Heaters shall meet or exceed the Federal Energy Eciency Standards eective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted and insulated with a non-CFC foam to reduce standby heat loss. The tank must be design certied for 300 PSI test pressure and 150 working pressure.

Residential Gas High Eciency Water Heater Specication

NRGSS01010
All dimension in inches.
Recovery capacity based on actual performance tests.
Water Connections – 3/4” on all models.
Not available in LP gas (Propane).
Certied for installations up to 00 ft. elevations.
Flammable Vapor Ignition Resistant Water Heaters
This FVIR design meets the American National Standards Institute standards (ANSI Z21.10.1 - 4.1 CSA Standards) that deal with the accidental or unintended ignition of ammable vapors outside the water heater, such as those emitted by gasoline.
MODEL
NUMBER
GALLON
CAPACITY
ENERGY
FACTOR
BTU INPUT
PER HOUR
RECOVERY
AT 90°
RISE
FIRST
HOUR
RATING
FOAM
THICKNESS
(INCHES)
DIMENSIONS IN INCHES DRAFT
HOOD
OUTLET
SHIPPING
WEIGHT
(LBS)
AB CD E F
PCG6240T403NOV 40 .70 40,000 43 70 GPH 2 20 61-3/4 58 51-1/2 23-1/4 25 3 or 4 157PCG6250T403NOV 50 .70 40,000 43 81 GPH 2 22 60-5/8 57-1/8 50-1/2 25-1/4 27 3 or 4 171Maximum Hydrostatic Working Pressure: 150 PSI
55